The Neurological Treatment Tables have been designed for postural exercises, rolling, turning and balance training. These extra wide two section tables provide effective usage for patients who have a loss of sensation or poor balance. Also useful in treating neurological conditions; stroke, head injury and orthopaedic treatments. The head section raises 90 degrees and is complete with a keyhole cut-out and filler.
In order to obtain ultimate stability and resistance to movement, we have built the NT600 and NT900 tables using lifting columns to elevate and lower the table. These synchronized lifting columns provide total stability on the table.
The Neurological Treatment Tables lower to 18.5” and rise to 34”. This allows the table to be low enough for floor to table or wheelchair transfers, and rise high enough for rehabilitation techniques. The foot pedal or hand held controls are available on both sides of the table, and an additional outlet is provided should there be a need for an extra control.
2 Section Table
Single foot pedal and hand held control
High strength seamless tubular frame
Head section actuator with hand held control
Keyhole head section cut-out with filler
Four lifting columns for vertical raising and lowering
Dual lever retractable caster system (5” casters)
Powder coat White or Gunmetal Grey frame
1.5″ thick upholstery foam
Antimicrobial naugahyde upholstery
Over 80 upholstery color options
1000 lb. lifting capacity
Dimensions: 41” x 77.5” (Customizable width from 40″ to 48″)
Power Supply: 120 Volt AC 60 Hz. Max. 5.8 Amp.
Fire retardant upholstery
Shipping Weight: 575 lbs.
Shipping Dimensions: 84” x 50” x 27”
- Date March 25, 2015
- Tags Beds